Slitter
Slitter
Purpose
Cuts strips to set width.
Basic Data
- Material: Copper and copper alloy strip
- Entry strip thickness: 0.1 ~ 0.8 mm
- Entry strip width: 50 ~ 350 mm
- Entry coil weight: max 3,000 kg
- Entry/exit coil I.D.: 300, 400, 500 mm
- Entry/exit coil O.D.: max 1,300mm
- Exit coil weight:
- No. 1 shaft max 1,500 kg
- No. 2 shaft max 2,000 kg
- Slitting width: min 15 ~ max 350 mm
Line Specification
- Number of cuts: max 20-strand
- Type of line: Drive cut, 2 shaft slip winding
- Line speed: max 200 m/min
Main Features
Cutter Stand and Scrap Winder
Cutter Stand and Scrap Winder
- Controls tension by AC vector inverter
- Controls movement using a power cylinder
Re-coiler Mandrel and Disk
Re-coiler Mandrel and Disk
- Controls speed by using an AC vector motor
- Automatically senses increase in outer diameter and maintains regular spacing using a separator
Cutter Stand
Cutter Stand
- Equipped with a high presicion clamp
Slip and Winding Disk
Slip and Winding Disk
- Maintains constant tension to strips as they are coiled
Machine Description
- Strip is pulled from uncoiler into cutter stand through pinch roll and is cut to set width
- The strip is wound onto recoiler, and scrap is wound onto scrap winder
- At end of process, strip on recoiler is ejected onto arm loader
| No. | Item | Specification |
|---|---|---|
| 1 | Un-Coiler | Loading weight: max 3000 kg Drum size: P300, 400, 500 x 400(L) mm |
| 2 | Slitter | Cutter arbor size: P80 x 380(L) mm Drive: AC vector motor |
| 3 | Scrap winder | Drum size: P450 x 250(L) mm Winding weight: 100 kg/drum |
| 4 | Re-coiler | Winding I.D.: P300 mm Winding O.D.: P1,300 mm |
| 5 | Arm loader | Loading weight: 2,000 kg |